Operating Instructions
70
3.5.7
Image Transfer
Image Transfer window
can set the Image Transfer feature. Network Camera can
buffer images and send the images via e-mail or FTP. The request to send the
image is initiated by a contact closure from the external sensors/devices
connected to the External I/O using the Alarm mode. The external sensors/
devices are customer provided. The images can also be sent in the interval of time
using the Timer mode. Make sure Date and Time has been configured. Refer to
page 62 about Date and Time.
Note
When you use FTP or e-mail in transferring the image, you need to set Default
Gateway and DNS Server address.
Note
The Alarm and Timer mode cannot be set at the same time.
Non Transfer
: Image Transfer feature is not in use.
Alarm mode
: The alarm trigger activates transferring the image. Refer to
page 72.
Timer mode
: The timer trigger activates transferring the image. Refer to page
78.
Summary of Contents for HCM270
