Panasonic HC-W580, Operating Instructions Manual

Page: 147 / 248

- 147 -
Preparations before using [Baby Monitor]
1 Check if the wireless access point is compatible with IEEE802.11b/g/n.
2 Install the smartphone application “Image App” on your smartphone. ( l 167 )
3 Set up a Wi-Fi connection between this unit and the wireless access point.
≥
[Easy Connection (WPS)] (
l
170 )
≥ Searching for wireless access points to set up a connection ( l 171 )
≥
Setting up a connection manually (
l
172 )
4 When the Wi-Fi connection is complete, follow the procedure in “Using [Baby
Monitor]”.
≥ Using [Wi-Fi Setup Wizard], you can also set up a Wi-Fi connection in conjunction with the
smartphone application “Image App”. (
l
169 )
Using [Baby Monitor]
≥ Proceed to Step 2 when your Wi-Fi connection has been made via [Set Wireless Access Point] in
[Wi-Fi Setup] (
l
170 to 173 ).
1
Press Wi-Fi button on this unit.
2
Touch [Baby Monitor] on the Wi-Fi menu screen.
≥ The SSID of the wireless access point to which this unit is connected is displayed.
3
Connect the smartphone to a wireless access point.
≥
To connect it, select the SSID of the wireless access point displayed on the screen of this unit.
4
Start up the smartphone application “Image App”.
≥ When this unit is connected to the Internet via the wireless access point, the notification function,
which sends notifications from this unit to the smartphone, becomes available.
≥ When the connection to this unit is complete, the screen of this unit turns off. To turn on the
screen again, touch the screen.
To exit [Baby Monitor]:
Touch [EXIT] displayed on the screen of this unit or press the Wi-Fi button.
≥
The message is displayed. Touch [YES] to close the indication.