- 75 -
Message is displayed when this unit is moved rapidly.
When “CAMERA PANNING IS TOO FAST.” appears, move the unit slowly while recording.
≥
Message will not appear while pausing the recording. (Message will appear even if it is pausing
the recording if [DEMO MODE] is set to [ON].)
This will reduce the wind noise coming into the built-in microphones while maintaining the realism.
≥
Switch to Manual Mode. (
≥
When [Strong] is set, you can check how effectively the wind noise is reduced with the icon
displayed on the screen. In descending order of the strength of the reduction effect,
/
/
/
is displayed.
≥
When [Normal] is set,
will be displayed on the screen.
≥
This function’s default setting is [Normal].
≥
When switching to Intelligent Auto Mode or Intelligent Auto Plus Mode, [Wind Noise Canceler] is
set to [Strong], and the setting cannot be changed.
≥
You may not see the full effect depending on the recording conditions.
Recording setting of the built-in microphone can be adjusted.
≥
[MIC SETUP] will become [STEREO MIC] when the [REC FORMAT] is set to [MP4/iFrame].
[SHOOTING GUIDE]
: [RECORD SETUP]
#
[SHOOTING GUIDE]
#
[ON]
[Wind Noise Canceler]
: [RECORD SETUP]
#
[Wind Noise Canceler]
#
desired setting
[Strong]:
When a strong wind is detected, this option effectively reduces the
wind noise by minimizing the low-pitched sound.
[Normal]:
This option extracts and reduces only the wind noise without
deteriorating the sound quality.
[OFF]:
Cancel the setting.
[MIC SETUP]
: [RECORD SETUP]
#
[MIC SETUP]
#
desired setting
[STEREO MIC]:
Sound from two directions is recorded in 2 ch by forward-facing
stereo microphones.
[ZOOM MIC]:
Sound is recorded with changing the directionality in conjunction
with the zoom operation. Sounds near the front of the unit are
recorded more clearly if you zoom in (close-up) and surrounding
sounds are recorded more realistically if you zoom out (wide angle).
MENU
MENU
MENU
