- 74 -
This will change the setting of the Image Stabilizer function and Maximum zoom ratio to the one
appropriate for the recording when a Wide Conversion Lens (optional) is attached to this unit.
≥
The following functions will not work:
j
j
AF ASSIST LAMP
≥
In Motion Picture Recording Mode, [ZOOM MODE] (
) is fixed to [Opt.Zoom 10
k
] (up to
10
k
). In Still Picture Recording Mode, a zoom magnification of up to 10
k
is possible.
This will reduce the wind noise coming into the built-in microphones while maintaining the realism.
≥
Switch to Manual Mode. (
≥
When [Strong] is set, you can check how effectively the wind noise is reduced with the icon
displayed on the screen. In descending order of the strength of the reduction effect,
/
/
/
is displayed.
≥
When [Normal] is set,
will be displayed on the screen.
≥
This function’s default setting is [Normal].
≥
When switching to Intelligent Auto Mode or Intelligent Auto Plus Mode, [Wind Noise Canceller] is
set to [Strong], and the setting cannot be changed.
≥
You may not see the full effect depending on the recording conditions.
≥
This function cannot be set when using an external microphone.
This function reduces the low-pitched sound when using an external microphone.
≥
Switch to Manual Mode. (
≥
This function can be set only when using an external microphone.
[WIDE CONV. LENS SET]
: [RECORD SETUP]
#
[WIDE CONV. LENS SET]
#
[ON]
[Wind Noise Canceller]
: [RECORD SETUP]
#
[Wind Noise Canceller]
#
desired setting
[Strong]:
When a strong wind is detected, this option effectively reduces the
wind noise by minimising the low-pitched sound.
[Normal]:
This option extracts and reduces only the wind noise without
deteriorating the sound quality.
[OFF]:
Cancel the setting.
[LOWCUT]
: [RECORD SETUP]
#
[LOWCUT]
#
[ON]
MENU
MENU
MENU