Panasonic HC-V785 Page 39 Operating Instructions Manual Download

Page: 39 / 222

- 39 -

This item is used to start the Optical Image Stabilizer demo.

≥

Touch [O.I.S. DEMO], the demonstration automatically starts.
When you touch [EXIT], the demonstration will be cancelled.

This item is displayed only when an Eye-Fi card is inserted.
Please refer to page

124

This item is displayed only when an Eye-Fi card is inserted.
Please refer to page

125

You can connect this unit and a PC with the USB cable and check software information (License) on
the PC.

Select the menu.

Connect this unit to a PC.

≥

A message will be displayed when the connection is complete. On the PC, confirm
[LICENSE.TXT].

≥

When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen to turn
the LCD monitor on.

≥

Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any
other USB cables.)

[O.I.S. DEMO]

: [SETUP]

[O.I.S. DEMO]

[Eye-Fi TRANSFER]

[Eye-Fi DIRECT]

[SOFTWARE INFO]

: [SETUP]

[SOFTWARE INFO]

MENU

Summary of Contents for HC-V785































































































































































































































Search results

Summary of Contents for HC-V785

Reviews:

Related manuals for HC-V785

Brands by name

Popular brands

Panasonic HC-V785, Operating Instructions Manual

Search results

Summary of Contents for HC-V785

Reviews:

Related manuals for HC-V785

Brands by name

Popular brands