Panasonic HC-V750 Owner'S Manual Download

Page: 57 / 220

- 57 -

≥

The sound of the parts recorded as FULL HD Slow Motion Video will not be recorded (

will be

displayed during the recording).

≥

In FULL HD Slow Motion Video Mode, still pictures cannot be recorded.

≥

In FULL HD Slow Motion Video Mode, images and sound are not output from this unit to another
device.

≥

When FULL HD Slow Motion Video recording starts, the following settings are canceled:

AF/AE tracking

PRE-REC

Fade

≥

On the thumbnail screen in Playback Mode, scenes recorded as FULL HD Slow Motion Video are
displayed with the

indication.

≥

You can set the playback speed on this unit in [SLOW PLAY SPEED] (

). In addition, you can

set the playback speed on another device to 1/4 normal speed in [Slow Speed Conversion]
(

113

Summary of Contents for HC-V750





























































































































































































































Search results

Summary of Contents for HC-V750

Reviews:

Related manuals for HC-V750

Brands by name

Popular brands

Panasonic HC-V750, Owner'S Manual

Search results

Summary of Contents for HC-V750

Reviews:

Related manuals for HC-V750

Brands by name

Popular brands