Panasonic HC-V750 Owner'S Manual Download

Page: 145 / 220

- 145 -

Select [Set connect. dest.] of the smartphone.

Enter the Device ID and Password displayed on the screen of this unit into
the smartphone.

≥

When the entry is complete, select [OK] (on your Android device) or [Complete] (on your iOS
device).

≥

If you want to check the Device ID and Password after performing Step 7, on the screen of this
unit, touch [Setup]

[Home Monitor Connect].

Touch [ENTER] on the screen of this unit

≥

Check that the message “Connecting...” has disappeared from this unit.

On the smartphone, select [Start Home Monitor] to start home monitoring.

∫

When configuring the home monitor settings using QR code

Press Wi-Fi button and touch [Home Cam].

Touch [QR code].

≥

QR code is displayed on the screen of this unit.

Turn off the Wi-Fi setting of the smartphone.

Start up the smartphone application “Image App”.

≥

(If the device is Android)
When a Wi-Fi connection guidance screen is displayed, select [No].

≥

(If the device is iOS)
If a confirmation message for the Wi-Fi setup is displayed, select [Close].

Enable the home monitoring setting from the menu of the smartphone
application “Image App”.

≥

Select [

(MENU)]

[Application function]

[Home Monitor], and enable [Use Home

Monitor].

Select [Set connect. dest.] of the smartphone.

On the smartphone, select [QR code] to scan the QR code displayed on the
screen of this unit.

≥

The Device ID and Password will be created. Select [OK] (on your Android device) or [Complete]
(on your iOS device).

Touch [NEXT] on the screen of this unit.

≥

Check that the message “Connecting...” has disappeared from this unit.

On the smartphone, select [Start Home Monitor] to start home monitoring.

To exit [Home Cam]:

Touch [EXIT] displayed on the screen of this unit or press the Wi-Fi button.

Summary of Contents for HC-V750





























































































































































































































Search results

Summary of Contents for HC-V750

Reviews:

Related manuals for HC-V750

Brands by name

Popular brands

Panasonic HC-V750, Owner'S Manual

Search results

Summary of Contents for HC-V750

Reviews:

Related manuals for HC-V750

Brands by name

Popular brands