Panasonic HC-V707 Operating Instructions Manual Download

Page: 33 / 158

- 33 -

Set the display method for the O.I.S. lock icon (

Please refer to page 99.

When about 5 minutes have passed without any operation, this unit automatically turns off to
save battery life.

≥

This unit will not automatically turn off even if [ECONOMY (BATT)] is set to [ON] in
following cases:

Using the AC adaptor*

Using the USB cable for PC, etc.

PRE-REC is used

During playback of the slide show

* When [ECONOMY (AC)] is activated, this unit automatically turns off.

When about 30 minutes have passed without any operation while connecting AC adaptor
with this unit, this unit automatically turns off.

≥

This unit will not automatically turn off even if [ECONOMY (AC)] is set to [ON] in following
cases:

Using the USB cable for PC, etc.

PRE-REC is used

During playback of the slide show

The unit is put into recording pause approx. 1 second when the unit is turned on with the
mode set to

≥

Depending on the recording conditions, start time may be longer than 1 second.

≥

In the quick power on mode, the zoom magnification becomes approx. 1

[O.I.S. LOCK DISPLAY]

[ON]/[OFF]

[ON]:

Constantly displayed.

[OFF]:

Icons will disappear after approx. 5 seconds without any touch
operation.

[EXT. DISPLAY]

[SIMPLE]/[DETAIL]/[OFF]

[ECONOMY (BATT)]

[ON]/[OFF]

[ECONOMY (AC)]

[ON]/[OFF]

[QUICK POWER ON]

[ON]/[OFF]

Summary of Contents for HC-V707































































































































































Search results

Summary of Contents for HC-V707

Reviews:

Related manuals for HC-V707

Brands by name

Popular brands

Panasonic HC-V707, Operating Instructions Manual

Search results

Summary of Contents for HC-V707

Reviews:

Related manuals for HC-V707

Brands by name

Popular brands