Panasonic HC-V230 Operating Instructions Manual Download Page 67

Page: 67 / 214

- 67 -

This allows recording of the pictures and sound to start approximately 3 seconds before the
recording start/stop button is pressed.

≥

appears on the screen.

≥

Aim the unit at the subject beforehand.

≥

There is no beep sound.

≥

PRE-REC is cancelled in the following cases.

Press the recording/playback button

Touch the recording mode switching icon

If you remove the SD card

If you remove the SD card while [MEDIA SELECT] is set to [VIDEO]/[SD CARD]

If you touch

If you press the Wi-Fi button

If you turn the unit off

If you start recording

After 3 hours have passed

≥

After setting PRE-REC, if recording starts in less than 3 seconds, motion pictures taken
3 seconds before pressing the recording start/stop button cannot be recorded.

≥

Images displayed on the thumbnail in Playback Mode will differ from the motion pictures
displayed at the start of playback.

This is for recording still pictures using the timer.

Each time the icon is selected, the indication changes by one setting in the following order:

10 (Records after 10 seconds)

2 (Records after 2 seconds)

setting cancelled

≥

When you press the

button,

10 or

2 flashes for the set period before a still picture is

recorded. After recording, the Self-timer is cancelled.

≥

In Auto Focus Mode, if the

button is pressed halfway once and then fully, the lens focuses

on the subject when the button is pressed halfway. If the

button is pressed fully all at once,

the lens focuses on the subject just before recording.

To stop the timer midway through

Touch [CANCEL].

≥

Setting the Self-timer to

2 is a good way to prevent image shake when the

button is

pressed while using a tripod etc.

This brightens dark areas so the image can be recorded clearly.

≥

If there are extremely dark parts or the brightness is insufficient, the effect may not be clear.

PRE-REC

This prevents you from missing a shot.

Self-timer

Intelligent Exposure

PRE-REC

HC-V550 HC-V530

HC-V250 HC-V230

HC-V550M

MENU

HC-V550 HC-V550M

HC-V250

Summary of Contents for HC-V230























































































































































































































Search results

Summary of Contents for HC-V230

Reviews:

Related manuals for HC-V230

Brands by name

Popular brands

Panasonic HC-V230, Operating Instructions Manual

Search results

Summary of Contents for HC-V230

Reviews:

Related manuals for HC-V230

Brands by name

Popular brands