5.1.2 Setting Communication Conditions
•
The communication in the two-way 2 mode is only available for 1:1 connection, and specify the unit
numbers within a range of 00 to 63.
•
The settings for "Baud rate", "Data length" and "Parity check" should be the same as the
communication settings specified on the external device.
•
In the two-way 2 mode, it is recommended to perform the CS/RS signal control to prepare for the case
that the response to a command from an external device and a message from the GT are sent at the
same time.
Item
Settings
Caution
Unit number
00 to 63
Do not specify the same unit
number for multiple GTs.
Baud rate
115200/57600/38400/19200/9600 bps
These settings should be the same
as the settings specified on the
external device.
Data length
7/8 bits
Stop bits
Fixed: 1 bit
Parity check
Odd/Even/Invalid
CS/RS signal control
No CS/RS signal (GT01)
Fixed: On (GT11, GT21)
On/Off (Other models)
The CS/RS signals are not used in
the command response mode.
Note
)
CS/RS signal (control) is not available for GT01.
Reference:
For the details of the communication parameters of GT, refer to <2.1 Setting on GTWIN>.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]