manualshive.com logo in svg

Panasonic GT02, Manual, Page: 14 / 67

Share
Download
Panasonic GT02 Manual Download Page 14

2-4 

2.1.3 Communication Parameters  

Selecting “File” 

 “Configuration” 

 “GT Configuration” of GTWIN displays the “GT configuration” dialog 

box. Clicking the “Communication Parameters” tab displays the following screen. 
This is where communication parameters for the external device connected to the GT are set. 

 
“Communication Parameters” screen (GT01, GT11, GT21) 

 

 
“Communication Parameters” screen (GT02, GT02L, GT05, GT12, GT32, GT32-E) 

  

 
Unit numbers 

Specify “unit numbers” when more than one GTs are connected using C-NET. 

 
COM Port (Connected to PLC/External device) 

This is used to specify the baud rate and transmission format when the GT is connected to an external 
device. 
Clicking on the 

 button displays a pull-down menu from which the value to be set can be selected. 

 

Baud rate: 

 

Data length: 

 

Stop bit: 

 

Parity: 

Select 9600, 19200, 38400, 57600 or 115200. 
Select either “7 bits” or “8 bits”. 
This is fixed at “1 bit”. 
Select “None”, “Odd” or “Even”. 

 

 

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Summary of Contents for GT02




































































Reviews:

No comments