Panasonic GSM EB-A100 Service Manual Download Page 24

Page: 24 / 76

– 3-18 –

3.12. Glossary of Terms

Term

Definition

DTMF

Dual Tone Multiple Frequency tones. The numeric keys 0 to 9, and * and # will generate

different DTMF tones when pressed during conversation. These are used to access

voice mail, paging and Home banking services.

GSM

Global System for Mobile communications. The name given to the advanced digital

technology that the telephone uses.

Home network

The GSM network on which subscription details are held.

Hot Key Dial

Hot Key Dial allows quick access to numbers stored in the Phonebook of Service Dial

Number list. The source of the Hot Key Dial may be defined by the user or

preprogrammed by the Service Provide. It is most likely to be preprogrammed to the

Service Dial Numbers by the Service Provider.

Phone Lock code

Used for security of the telephone.

Message Centre

Where messages are sent before they are forwarded on to their destination. The

Message Centre telephone number may be programmed into the SIM or supplied by

the service provider.

Network operator

The organization responsible for operating a GSM network.

Password

Used for the control of the call bar function. Supplied by the service provider.

Personal Identification Number used for SIM security. Supplied by the service provider.

PIN2

Personal Identification Number used for the control of Fixed Dial Memory and call

charge metering. Supplied by the service provider.

PUK / PUK2

PIN/PIN2 Unblocking Key. Used to unblock the PIN/PIN2. Supplied by the service

provider.

Registration

The act of locking on to a GSM network. This is usually performed automatically by the

telephone.

Roaming

The ability to use the telephone on networks other than the Home network.

Service Dial

Service Dial Numbers are predefined numbers that allow the user to access a set of

Numbers

special services provided by the Service Provider. For example billing information or

access to Voice Mail.

Service provider

The organization responsible for providing access to the GSM network.

SIM

Subscriber Identification Module. A small smart-card which stores unique subscriber

and user-entered information such as Phone Book, Fixed Dial Memory and short

messages. Supplied by the service provider.

Supplementary

Network-controlled GSM functions supported by the telephone. Supplementary services

may only be available on a subscription bases.

Service

Spaces in a stored telephone number. When the telephone number is recalled pressing

Wild numbers

a numeric key will fill in a space. This can be used to restrict dialing to a specific area.

Summary of Contents for GSM EB-A100













































































Search results

Summary of Contents for GSM EB-A100

Reviews:

Related manuals for GSM EB-A100

Brands by name

Popular brands

Panasonic GSM EB-A100, Service Manual

Search results

Summary of Contents for GSM EB-A100

Reviews:

Related manuals for GSM EB-A100

Brands by name

Popular brands