Panasonic GP-MH310 series Technical Manual Download Page 20

Page: 20 / 43

Communications Protocol

Model: GP-HB310

Note 3 Exclusive processing

⁃

Setting to auto iris mode, when SENSE UP is

set

Unable to set when:

・

Motion sensor is set to ON.

・

Auto pursuit is set to ON.

Below items will be changed automatically:

・

AGC will be ON.

・

Shutter speed will be set to normal settings.

⁃

Setting to manual iris (EI ON)

Below items will be changed automatically:

・

Shutter speed will be set to normal settings.

⁃

Setting SENSE UP

(*Valid in auto iris mode)
Unable to set when:

・

Motion sensor is set to ON.

・

AGC is set to OFF.

・

Auto pursuit is set to ON.

Below items will be changed automatically:

・

Shutter speed will be set to normal settings.

・

V-RESO UP will be set to OFF.

⁃

Setting shutter speed to high-speed

shutter

mode (SHORT)

Unable to set when:

・

SENSE UP is set in Auto iris mode.

・

EI is set to ON in Manual iris mode.

⁃

Setting the shutter speed to long

exposure shutter mode (LONG)

Unable to set when:

・

SENSE UP is set in Auto iris mode.

・

EI is set to ON in Manual iris mode.

・

Motion sensor is set to ON.

・

Auto pursuit is set to ON.

Below items will be changed automatically:

・

V-RESO UP will be set to OFF.

⁃

Setting the motion setting to

ON Unable to set when:

・

SENSE UP is set in Auto iris mode.

・

Shutter speed is set to long exposure shutter

mode (LONG).

Below items will be changed automatically:

・

Auto pursuit will be set to OFF.

⁃

Setting V-RESO UP to

ON Unable to set when:

・

Shutter speed is set to long exposure shutter

mode (LONG).

・

SENSE UP is set in Auto iris mode.

・

AGC is set to ON.

⁃

Setting AGC to

OFF Unable to set
when:

・

D/N is set to AUTO.

・

SENSE UP is set in Auto iris mode.

⁃

Setting D/N to

AUTO

Below items will be changed automatically:

・

AGC will be set to ON.

⁃

Setting auto pursuit to

ON Unable to set when:

・

SENSE UP is set in Auto iris mode.

・

Shutter speed is set to long exposure shutter

mode (LONG).

Below items will be changed automatically:

・

Motion sensor will be set to OFF.

⁃

AutoScene

Mode

・

When BLC Iris or Shutter speed settings are

changed when AutoScene mode is set to ON,
AutoScene Mode will be set to OFF.

−

Summary of Contents for GP-MH310 series












































Search results

Summary of Contents for GP-MH310 series

Reviews:

Brands by name

Popular brands

Panasonic GP-MH310 series, Technical Manual

Search results

Summary of Contents for GP-MH310 series

Reviews:

Brands by name

Popular brands