Panasonic GHP, Test Run Manual

Page: 58 / 68

Basic Operations
28

Start operation.
Press
(The operation indicator illuminates.)

Select the item to set.
Press .

Change the setting.
Press → .
(The cursor disappears.)
Note

Operation modes that cannot be set are not displayed.

The swing and airflow direction on the remote control is not synchronised with the flap movement.

The flap display differs from the actual flap angle.

Pressing after recovery from mains power failure will resume operation with the contents before mains power
failure has occurred.

If no operation is performed for a certain period of time, the backlight turns off to save electricity. (Press any
button for illumination.)

The energy saving operation restricts the maximum current value, resulting in decreased cooling/heating
performance.
(If the current of outdoor units does not reach the peak due to low load operation, the current value is not
restricted.)

For models that cannot change the airflow direction, the airflow direction is not displayed.

The fan speed and airflow direction in cooling/drying operation can be adjusted with 3 levels if controlling using
one remote controller while assigning a indoor unit (e.g. ceilinghung type) which has a 3-level adjustment of fan
speed and airfl ow direction in cooling / drying operation as main unit, and assigning a 4-way ceiling cassette
type as sub unit.
n
Operation mode (e.g. Cool, Heat, etc.)
Press .
: o t u A *
The mode is
automatically
switched to
Cool or Heat to
achieve the set
temperature.
Heat
Dry
Cool
Fan
Auto
Ⅲ － 12