1.2 Specifications
9
Interface
Twisted pair port 1-8: RJ45 connector (*1)
Transmitting and receiving network system
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX
IEEE802.3ab 1000BASE-T
Twisted pair port 9,10: RJ45 connector
Transmitting and receiving network system
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX
IEEE802.3ab 1000BASE-T
(*1) Energy Efficient Ethernet function
IEEE802.3az(LPI)
SFP extension slot 9,10port
Transmitting and receiving network system
IEEE802.3z 1000BASE-SX/1000BASE-LX
*Select either RJ45 or SFP for use
SFF-8472 (DMI:Diagnostic Monitoring Interface)
Console port: RJ45 connector
RS-232C(ITU-TS V.24)
Switching mode
Store and Forward method: Forwarding rate
10BASE-T:
Max. 14,880 pps/port
100BASE-TX:
Max. 148,800 pps/port
1000BASE-T:
Max. 1,488,000 pps/port
MAC Address table:
Max. 16K entry/unit
Buffer: 2.0Mbyte/unit
* EAP frame, BPDU frame transmission
Link Aggregation
IEEE802.3ad
Configurable up to 5 groups (Max. 8 ports per group)
VLAN
IEEE802.1Q tagging VLAN protocol compatible
(Max. 256 groups including the default VLAN)
Port based VLAN, Internet Mansion function
QoS
IEEE802.1p compatible, Supports 8 priority queues
Management method
ZEQUO assist Plus, SNMP v1/v2c/v3, Telnet, SSH v2, Console,
WEB control screen
PoE Power supply function
Ports 1 to 8 support the IEEE802.3at/af compatible power supply function.
Maximum power supply: 30 W per port, 124 W in total
PoE Power supply method
Alternative A (Using 1,2,3,6 pin)
Silent fan control
The fan rpm can be set in accordance with the usage environments.
If the fan rpm are set, the available power supply will be
automatically restricted. If the fan rpm (Fan Speed) are set to Low,
the device’s overall available power supply (Power Budget) will be
automatically restricted, and it can be used with the fan noise
reduced.
Fan Speed
High
Low
Operating
environment
temperature
Available
PoE power
Comments
Factory default
0-60°C
124W
62W
