Panasonic GA-AS4TPoE+ Series Installation Manual Download Page 1

Page: 1 / 17

Installation Guide



Thank you for purchasing our product.



This document provides important information about safe and proper
operations of this Ethernet Switch.



Please read the

"Important Safety Instructions" on pages from 3 to 5



Any problems or damages resulting from disassembly of this Ethernet
Switch by customers are not covered by the warranty.

I0916-50822 Printed in Japan

GA-

PN25048-TH

PN25048-MY

PN25048-ID

PN25048-SG

PN25048-NZ

Model No.



The instruction manuals (Web Version), latest firmware and
SDN application (ZEQUO assist Plus) can be downloaded
from the following URL.

https://panasonic.co.jp/ew/pewnw/english/datadownload/index.html

2-12-7, Higashi-Shimbashi, Minato-ku, Tokyo Japan, 105-0021
©

Panasonic Electric Works Networks Co.,Ltd.

Panasonic Electric Works Networks Co.,Ltd. 2022

Summary of Contents for GA-AS4TPoE+ Series


















Search results

Summary of Contents for GA-AS4TPoE+ Series

Reviews:

Related manuals for GA-AS4TPoE+ Series

Brands by name

Popular brands

Panasonic GA-AS4TPoE+ Series, Installation Manual

Search results

Summary of Contents for GA-AS4TPoE+ Series

Reviews:

Related manuals for GA-AS4TPoE+ Series

Brands by name

Popular brands