7
<Only for model with Barcode Reader>
Laser Devices
<Only for model with the following label on the computer>
This equipment is using lasers that comply with IEC60825-1:2014, EN 60825-1:2014 and JIS C6802:2014 regulations.
The laser is a “Class 2” laser which is indicated on the label for this product. Class 2 laser readers use a low power, visible light diode.
As with any very bright light source, such as the sun, the user should avoid staring directly into the light beam. Momentary exposure to a
Class 2 laser is not known to be harmful.
Caution-Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation
exposure.
Labeling/Marking
Location of aperture
Label
Beam Divergence
- Vertical angle: 20 degree
- Horizontal angle: 30 degree
630 - 680
nm
, 1
mW
MAX.
13-E-1
<Only for model with the following label on the computer>
This equipment is using lasers that comply with US21CFR1040.10, 1040.11, EN 60825-1:2007 and IEC60825-1:2007 regulations.
The laser is a “Class 2” laser which is indicated on the label for this product. Class 2 laser readers use a low power, visible light diode.
As with any very bright light source, such as the sun, the user should avoid staring directly into the light beam. Momentary exposure to a
Class 2 laser is not known to be harmful.
Caution-Procedures other than those specified herein may result in hazardous radiation exposure.
Labeling/Marking
Location of aperture
Label
Beam Divergence
- Vertical angle: 20 degree
- Horizontal angle: 30 degree
630 - 680
nm
, 1
mW
MAX.
13-E-2
Summary of Contents for FZ-M1 Series
Page 171: ...171 MEMO ...
