![background image](http://html.mh-extra.com/html/panasonic/fz-55-series/fz-55-series_operating-instructions-manual_264472019.webp)
Getting Started
19
8 Update the on-screen manual
A
Connect to the internet. Sign in to Windows as an admin-
istrator.
For further information, refer to
Connect to a network
.
B
Update the on-screen manual.
Click (Start) - [Panasonic] - [Panasonic PC Manual
Selector].
Follow the on-screen instructions.
9 Create a recovery disc
A recovery disc allows you to install OS and restore its factory
default condition, in case, the recovery partition of the flash
memory is damaged.
Refer to
è
Reference Manual
“Create a Recovery Disc”
about creating the disc.
NOTE
l
To set the password, proceed as follows.
A
Click (Start) - (Settings) - [Accounts] - [Sign-in options].
B
Click [Add] under “Password”.
l
Set the key entry mode to English (“ENG”) and enter characters.
The keyboard layout can be added or changed in the following steps.
A
Click (Start) - (Settings) - [Time & Language] - [Region & language].
B
Click a language and click [Options].
C
Click [Add a keyboard] and choose a keyboard from the list.
l
Remember your password. If you forget the password, you cannot use Windows. Creating a
password reset disk beforehand is recommended.
l
PC Information Viewer
This computer periodically records the management information of the flash memory, etc. The
maximum data volume for each record is 1024 bytes.
This information is only used for estimating the cause in the case when the flash memory goes
down by any possibility. They are never sent to outside via network nor used for any other
purpose except for the purpose described the above.
To disable the function, add the check mark for [Disable the automatic save function for man-
agement information history] in [Hard Disk Status] of PC Information Viewer, and click [OK].
Then follow the on-screen instructions.
(
è
Operating Instructions - Reference Manual
“Troubleshooting” “Checking the Computer’s
Usage Status”)