12
INSTALLATION
WALL INSTALLATION-
IX
III
(
)
INSTALLATION
WALL INSTALLATION-
IX
III
(
)
This installation method is only for 12-inch and 24-inch
joists.
2. Remove the backing paper from the spacer, attach the
spacer to the flange of the fan body. The holes on the
spacer should line up with the holes on the flange.
(Fig. 24)
3. Secure the suspension bracket into bracket cover of
the adaptor (for 24-inch joists, refer to Fig. 2 on page 4).
Secure the suspension bracket into bracket cover
at the back of the fan body (for 12-inch joists, Fig. 25-2).
I
1. Before installation, Secure the fan body to adaptor by
using thumb screw. (Fig.1 of page 4)
Warning Concerning Removal of Covers.
The unit should be serviced by qualified technicians only. No service information is provided for customers.
Your product is designed and manufactured to ensure a minimum of maintenance. However, should your
unit ever require service, a nationwide system of factory service centers and AUTHORIZED INDEPENDENT
SERVICE CENTERS is maintained to support your product's warranty.
(In the U.S.A.,call 1-866-292-7292 to Customer call center.)
P ODUCT SE VICE
R
R
P ODUCT SE VICE
R
R
4. Secure the suspension bracket to the wall stud using long
screws (ST4.2X20). Secure the fan body and spacer
to stud using long screws (ST4.2X20). (Fig. 25)
6. Refer to the Fig. 12-3, 12-4 (page 9) and Fig. 7
(page 8) of the original installation instruction to
complete the motor/grille assembly installation.
X0806-1047
08VSA1420A
PANASONIC CONSUMER ELECTRONICS COMPANY
Division de Panasonic Corporation of North America,
PANASONIC CANADA INC.
5770 Ambler Driver, Mississauga, ON L4W 2T3
www.panasonic.com
One Panasonic Way, Secaucus, NJ 07094
Fig. 25-3
Fan body
Stud
Spacer
Fig. 24
Spacer
Backing paper
Adhesive
Spacer
Fig. 25-2
2 Long screws
(ST4.2X20)
2 Long screws
(ST4.2X20)
Suspension
bracket
I
Fig. 25-1
2 Long screws
(ST4.2X20)
2 Long screws
(ST4.2X20)
