11
INSTALLATION
WALL INSTALLATION-
VII
I
(
) CONTINUED
INSTALLATION
WALL INSTALLATION-
VII
I
(
) CONTINUED
4. Insert the suspension bracket into fan body (refer to
step 2 of installation , page 4 .
I
)
5. Secure the fan body to the studs by using long screws
(ST4.2X20) (
step 5 to step 7 of installation
of
page 7). (Fig. 21)
refer to
II
Fig. 21
2 Long screws
(ST4.2X20)
2 Long screws
(ST4.2X20)
Fig. 22
INSTALLATION
WALL INSTALLATION-
VIII
II
(
)
INSTALLATION
WALL INSTALLATION-
VIII
II
(
)
Fig. 23
2 Long screws (ST4.2X20)
4 Long screws
(ST4.2X20)
2. Insert the suspension bracket into bracket cover of adaptor
side and the back of the fan body (refer to Fig.12-1 of
page 8).
3. Insert the fan body between studs. Make sure the fan body
is level and square(prependicular) with the stud. Ensure
that distance C 3/16 inch (5mm).
4. Secure the suspension bracket to studs by using long
screws (ST4.2X20). (Fig. 22, Fig. 23)
5. Secure the suspension bracket to fan body by using
screw
(ST4.2X10) (refere to Fig. 4 of page 5).
II
1. Before installation, Secure the fan body to adaptor by
using thumb screw. (Fig.1 of page 4)
IMPORTANT:
Ensure distance C is 3/16 of an inch (5 mm) during the
installation process as follows.
inches (mm)
Adaptor
Wall
Stud
C 3/16 (5)
Fig. 20
2 Long screws
(ST4.2X20)
2 Long screws
(ST4.2X20)
Stud
3. Secure it to studs by using long screws (ST4.2X20).
(Fig. 20)
6. Refer to the Fig. 12-3, 12-4 (page 9) and Fig. 7
(page 8) of the original installation instruction to
complete the motor/grille assembly installation.
6. Refer to the Fig. 12-3, 12-4 (page 9) and Fig. 7
(page 8) of the original installation instruction to
complete the motor/grille assembly installation.
