Panasonic FP-XH M8N16PD, User Manual

Page: 534 / 556

Specifications
26-78
26.7 Table of Special Data Registers
Register
Number
Name Description R W
DT90000 Self-diagnostic error code
When a self-diagnostic error occurs, the error code
is stored.
○ ×
DT90001 Unused × ×
DT90002
Function cassette I/O error
occurring location
When an error occurs in the function cassette, the
corresponding bit is ON.
7 3 2 1 0 (Bit No.)
2 1 (Expansion No.)
15 11
ON(1)
：
Abnormal OFF(0)
：
Normal
○ ×
DT90003
-DT90005
Unused × ×
DT90006
Function cassette error
occurring location
When an error occurs in the function cassette, the
corresponding bit is ON.
7 3 2 1 0 (Bit No.)
2 1 (Expansion No.)
15 11
ON(1)
：
Abnormal OFF(0)
：
Normal
○ ×
DT90007 System register error number
When there is mismatch in the setting content of the
system register, save the object system register
number.
○ ×
DT90008
Communication error flag
COM4 port
Save error contents when using the COM4 port. ON
(1): Error, OFF (0): Normal
bit no. 15
0
0 0 0 0 0 0 0 0 0 0 0 0
8 7
COM4 Ultra-limit running error
COM4 Framing error
COM4 Parity error
COM4 Overflow error
H00 Fixed
○ ×
DT90009
Communication error flag
COM2 port / COM3 port
Save error contents when using the COM2 / COM3
port.
ON (1): Error, OFF (0): Normal
bit no. 15
0
0 0 0 0 0 0 0 0
8 7
COM2 Ultra-limit running error
COM2 Framing error
COM2 Parity error
COM2 Overflow error
COM3 Ultra-limit running error
COM3 Framing error
COM3 Parity error
COM3
Overflow error
○ ×
DT90010
FP-X Expansion I/O Unit
verify mismatched unit
position
When the FP-X expansion I/O unit installation state
turns to power ON, the corresponding bit to the unit
number is ON (1). Monitor with BIN display.
7 3 2 1 0 (Bit No.)
(Expansion No.)
15 11
ON(1)
：
Abnormal OFF(0)
：
Normal
4 5 6
7 3 2 1 0 4 5 6
○ ×