3-10
(12) Removal of the pass select gate
1) Remove the external covers. (front/rear)
2) Remove the top cover. (2 screws)
3) Remove the gate solenoid with mounting
bracket. (2 screws, 1 spring, 1 gate arm
and 1 connector)
4) Remove the straight paper exit sensor
connector.
5) Remove the upper guide plate for the
straight paper exit.
(2 screws and 2 springs)
6) Remove the pass select gate. (1 E ring)
(Adjustment of the gate solenoid)
Adjust the solenoid bracket mounting
position so that the gate arm is contacting
soleniod
5
5
3
4
6
