131
Operation Manual
FT1020G3 Rev 2.10.4
25.5
Sensors Activating SERVICE Signal (H4/U5)
Menu H4/U5 is a list of the sensor(s) having activated service signal.
When SERVICE signal is generated in the system, the search symbol
is shown in the
display's symbol area.
Regarding the SERVICE signal levels, see the EBLWin “Help” instructions, chapter
"SERVICE signal".
Note
: SERVICE signal provides only information to indicate that the sensor is to be
replaced soon with a new/clean sensor. After the replacement, the SERVICE signal has to
be acknowledged for this sensor, see chapter "Acknowledge SERVICE signal (H8/S2)”,
page 152.
Action
Text in display
Comments
"Menu"
According to chapter
"Access", see page 42.
Scroll to menu H4.
H4 Present system status
"
↲
"
U1 Disablement
U2 Disablement by time channel
U3 Open doors
U4 Sensor values
U5 Sensors activating SERVICE signal
U6 Technical warning
U7 Event log
U8 Information
Scroll to menu U5.
U5 Sensors activating SERVICE signal
"
↲
"
Sensor, Zone ZZZ address AA needs service
technical number xxxxxx
14-03-2013 09:09:15
Sensor, Zone ZZZ address AA needs service
technical number xxxxxx
14-03-2013 19:09:35
Number of sensors: 2
If there are no sensors
activating service signal,
--List is empty-- will be
shown. It is a list in
which you can scroll
with "▼" or "▲".
"ESC"
U5 Sensors activating SERVICE signal
Scroll to another menu
or press "ESC".
Summary of Contents for Firetracker FT1020G3 CIE
Page 1: ...Operation Manual FT1020G3 Rev 2 10 4 For Software V2 10 4 FT1020G3 FDCIE MA430 March 2023...
Page 2: ...This page has deliberately been left blank...
Page 176: ...176 Operation Manual FT1020G3 Rev 2 10 4 Figure 24 FT1020G3 Standard Block Wiring Diagram...
Page 177: ...177 Operation Manual FT1020G3 Rev 2 10 4 Figure 25 FT1020G3 New 5012 PCB Layout...
