Communication and
Audio Interface Modules
Installation Instructions
© 2005-2011 SimplexGrinnell LP. All rights reserved.
Specifications and other information shown were current as of publication and are subject to change without notice.
Simplex and the Simplex logo are trademarks of Tyco International Ltd. and its affiliates and are used under license.
574-844
Rev. P
This publication describes the installation procedure for Transponder Interface Cards (TICs),
Audio Riser Modules, and the Network Audio Riser Controller Module for installation in 4100U
and 4100ES Fire Alarm Control Panels.
This product is compatible with 4100U and 4100ES Fire Alarm Control Panels (FACP).
This publication also includes connections that provide the Non-Alarm Audio (NAA) Interface
feature.
IMPORTANT:
Verify FACP System Programmer, Executive, and Slave Software
compatibility when installing, or replacing system components. Refer to
the Technical Support Information and Downloads website for compatibility
information.
Topic
See Page #
Cautions and Warnings
2
TICs and Audio Riser Modules
3
System Guidelines
8
Network Audio Riser Controller Module
9
Configuration 10
Mounting 12
Wiring 13
Digital Audio Riser Module (566-407,-833)
21
Non-Alarm Audio (NAA) Interface
23
Field Replacement of the Digital Audio Riser Module (566-243)
26
Digital Audio PDI Termination Plug
27
Introduction
In this Publication
firealarmresources.com