Panasonic F-YWP33N, Operating Instructions Manual

Page: 8 / 24

To force Continuous Dehumidifying
(when humidity level cannot be controlled)
To clean and restrain bacteria
(Refer to: Effectiveness of Filter P.18)
(Dehumidifying operation is stopped at this time)
Maintain humidity level (approximately 65%)
Operation mode / Air volume selection
8
Air volume selection
(Laundry/Mode/Humidity)
2
1
Insert the power plug
Turn on the unit
Press to select
3
P.11
Select the
Air direction
4
To stop operation
When Full Tank Indicator is
flashing (P.14)
Air volume selection
The product may run 3 minutes in fan
mode after operation stopped to dry its
internal side.
(power off mildew prevention p.7)
Please unplug the power plug at least 3
minutes after stopping the operation.
To use timed power off (P.14)
Operation will stop → Please empty the
tank
3 2 1 4
Mode indicators
Air volume display
Power off/on button
Air flow scope display
To keep humidity at a comfortable level
Humidity sensor detects the ambient level
and keeps indoor humidity at the most
suitable level for human body. However, the
feeling of humidity varies from person to
person; the dehumidifying mode is available
for adjusting the humidity if needed.
The Dehumidifier operates during high
ambient humidity, and stops at low ambient
humidity.
Humidity level will be adjusted automatically
according to the indoor temperature.
Operation
mode
Louver indicator
Your product may enter protection mode with air
volume and direction in case room temperature
goes above 32ºC. (system sounds three beeps if
you try to press air volume and direction key)
Press to
select
The best operation air volume in
factory default settings
For economy drying,
dehumidification, and fan operation
For quiet drying, dehumidification,
and fan operation
To change air volume
(select operation mode P8~P10 before selecting
settings)
For fast drying, dehumidification,
and fan operation