20
FURTHER INFORMATION
The sensor can detect the dirtiness of the air, and then indicate the dirtiness through clean sign. The
product can optimize the air volume automatically in automatic operation according to the type of dirt.
The sensor’s operation may vary with the indoor airflow condition if a heater is placed near the product in a room.
The louver and front panel move to the best position according to the type and degree of dirt, and thus the product
will operate.
The product uses the airflow function separately according
to the type of dirt in the air, to achieve a good dirt-removal
effect.
Odor and smoke
Odor and smoke
are detected
Odor or smoke
and house dust
are detected
The whole front panel
absorbs the odor and smoke
floating in the air effectively.
When people smoke or
cook, the odor and smoke
are removed together.
(Figure )
When the air volume is set to “Hi”, the product will operate
with the front panel open.
The product will operate with the front panel open after
operating for 10 minutes.
It refers to the automatic operation by combining the “patrol mode” in which the product checks the dirt in the air in the
room every hour. With the “learning mode” in which the product can forecast the dirt generation by mastering the
generation time of dirt every day. It saves power by stopping operation automatically when the air is clean. Meanwhile,
the product will operate in advance to eliminate the dirt effectively before spreading, thus reducing the operation time.
The product will stop operating automatically after the air is cleaned. After the
operation is paused for 50 min,the product will operate for 10 min with Air
volume set to “Med” in the patrol mode.
While the operation is paused and in the patrol mode, if the dirt is detected,
the product will operate with the air volume corresponding to the dirtiness.
If “Full Auto” or “Clean/Humid.” are set, the product will also operate according
to the indoor humidity even if the indoor air is clean.
Smoke (cigarettes, incenses, etc.)
