Cleaning method
MAINTENANCE
Do not use the detergents shown below.
For installation and removal methods of front
panel and filters, please read P.7~8.
When cleaning, do not leave the removed parts
unattended.
(Otherwise, it may cause tripping or damage.)
Do not operate the product when the HEPA
composite filter is removed.
(Dust will be inhaled into product inner parts,
and causes the product breakdown. The HEPA
composite filter cannot function while it is
removed.)
Do not operate the product when the deodoriz-
ing filter is removed.
(The deodorizing filter cannot function while it
is removed.)
When using chemically treated cloth, be sure
to follow the instructions carefully.
Make sure to disconnect the
power plug before cleaning
the product.
(Otherwise, the product might operate
with the possibility of electric shock or
injury.)
WARNING
Polish
Alkaline detergent
Thinner
Bleach
Kerosene
Alcohol
MAINT
ENANCE
11
Deodorizing filter
When there is dust around the deodorizing
filter, remove the dust with a vacuum
cleaner, etc.
Do not wash the filter with water.
Clean the black side (front side)
with a vacuum cleaner, etc.
HEPA composite filter
< about once every 2 weeks >
Dusting brush nozzle
or gap suction nozzle
Do not wash the
filter with water.
Please do not punch too much, otherwise
the filter may be damaged.
Maintenance is unnecessary for the white
side (back side).
Wipe off any dust and dirt using
a well wrung-out cloth
Body and front panel
< about once a month >
Do not wipe it with a hard cloth or hardly.
Otherwise, the surface may be damaged.
Wipe the power plug with a dry cloth.
Lens(top left)
Dry cotton swab
Wipe the dirt off the lens with a dry
cotton swab
Dirt sensor
< about once every 3 months >
Remove the external cover of dirt sensor as
shown below.
Wipe the lens with a dry cotton swab as
shown below.
Wipe the lens periodically.
(The sensor may not function normally with
accumulation of moisture and smoke from
cigarette.)
Lay with newspapers, etc
to avoid dust messing floor.
Notice
Do not insert a cotton swab in other parts
other than the lens.
Be sure to disconnect the power plug before
cleaning.
You can use a light to see the lens clearly.
