(Indicator lights on)
(Long press 3 sec)
Long press the button for 3 seconds, then the child lock is set. With this
setting, other buttons are disabled when you press them, with sound “BI-BI-”.
To prevent child from wrong operating.
Long press the button for 3 seconds again to cancel
.
( indicator lights off)
Child lock
Do not shake the louver with hands during operation.
(Otherwise, the angle and action range may change accordingly.)
→
Please stop operating the product immediately if it is shaken.
(The product will restore to the normal status after it restarts.)
If power failure occurs when product is operating, the product will restart automatically when power
on again, and operate in the mode when power failure.
OPERATION
Indicator
lights off
The indicator will be changed sequentially as figure below.
Timer operation.
Timer
2 hours timer
The product will stop operating after 2 hours.
4 hours timer
The product will stop operating after 4 hours.
Cancel timer
8 hours timer (sleep mode)
Clean sign and air volume indicator light off, indicators on
control panel dim, and the product operates at low speed,
then stops operating after 8 hours.
10
Notice
Remove PM2.5 quickly.
Press the button again to cancel.
( indicator lights off)
When operates in PM2.5 mode, timer
cannot be set.
(Indicator
lights on)
PM2.5
When indicator is on, you can press the button to remove PM2.5 quickly,
until the indicator lights off. (At this moment the PM2.5 mode will stop,
then product will switch to the previous mode and continue.) But, If you press the
button when indicator is off, the PM2.5 mode only will operate in 1 min,
then product will switch to the previous mode and continue.
Notice
