確
認
與
設
置
CONFIRMATION
AND SET
UP
安裝過濾網
產品上的鉤爪(
2
處)
使產品上的凹槽(
3
處)與鉤爪咬合。
將黑色面(正面)朝外，使與產品上的鉤爪咬合。
安裝過濾網(
2
種)和前面板。
安裝脫臭過濾網。(無內外、上下的區分）
安裝
HEPA
多功能過濾網。(有內外的區分、無上下的區分）
安裝前面板。
將前面板的凸起處插入產品上的
小孔(
2
處)，並且向下按到底。
使用前請務必安裝好前面板。
接通電源
插入電源插頭。
因為異味感應器以插入電源插頭時的空氣
潔淨度作為基準，所以建議當室內空氣清
潔時（如沒有煙味時），插入電源插頭。
(異味感應器的基準會根據室內的空氣清
潔度自動更新。）
設置
SETUP
Install filters
Power-on
Be sure to install front panel before use.
Install the filters (2 types) and front
panel.
Connect the
power plug.
Install deodorizing filter.
(There is no distinction between
inside and outside, upper and lower)
Install HEPA composite filter.
(There is distinction between inside and outside,
no distinction between upper and lower)
Install front panel.
When inserting the power plug,
as the odor sensor uses the degree
of cleanliness at this time as the
standard, we recommend that you
plug it in when the air is fresh (such
as when there is no cigarette
smoke).(The standard of the odor
sensor automatically updates itself
according to the degree of the
indoor cleanliness.)
Press button, then the clean
sign blinks for about 5 seconds.
按下 按鈕，空氣污染度指示燈
閃爍約
5
秒。
提示事項
Notice
Projections of the product (2 places)
With the black side (front side) outside,
and align it with the projections of the
product.
Fit the clutch into the
indentation (3 places)
of the product.
Push in the protrusion into
holes (2 places) of product
and press properly.
9
