常见问题解答
咨询或送去维修之前，请先确认以下情況。
为什么出风口发出“叽”的声音？
怎么关闭空气污染度指示灯？
Please confirm the following before you put questions forward or send the product for repair.
FAQ
How to turn off the clean sign?
There is a slight sound when nanoe
®
is being generated. Depends on the environment and
operation mode, the sound may be a bit loud or inaudible but it is not abnormal.
产生
nanoe
®
时，将发生些许声音。根据使用环境、运转模式不同，声音的大小有所不同，这并非异常。
Please press and buttons at the same time for about 3 seconds during
operation.
在运转过程中同时按下 和 按钮约
3
秒。
Please press the buttons for about 3 seconds again to relight clean sign.
再次按下按钮约
3
秒，可重新点亮空气污染度指示灯。
18
即使是持续运转，空气污染度指示灯一直为“红色”
受到浴室等热气、喷雾产生的气体影响，指示灯可能会变红。
空气有污浊，但空气污染度指示灯显示仍为“蓝色”
请确认产品是否在污染物难以吸入机体或面积太大的场所使用？(第
5
页、末页)
Is the product placed in area where the dirty air is difficult to be cleared or the room size is too
large for the product? (P. 5, back cover)
Why is a “jee” sound from the emission outlet?
Why does the clean sign remain red even when the operation continues?
Why does the clean sign remain blue even when the air is dirty?
The indicator may illuminate red when the product is subject to steam or vapor emitting
from sprayers.
