OPERATION
使用方法
9
本產品操作面板為觸摸屏
，
使用時請使用手指儘量大面積接觸觸摸鍵(接觸面積過小
，
有可能導致觸摸後無反應)
。
定時鍵
靜音自動鍵
風量鍵
運轉關/開鍵
PM2.5
鍵
如果產品運轉時斷電了
，
當再次來電時
，
產品將自動重啟並以斷電時的模式進行運轉
。
Timer button PM2.5 button
Silent Auto button Air volume button
Power off/on button
This product adopts touch screen operation, contact area is as large as possible when using finger to
press (if contact area is too small, may result in no response after touch).
If power is disconnected while operating, when it is connected again, the product will automatically
restart and operate in the mode it was in when power was lost.
開始或停止運轉
。
觸摸此鍵產品開始運轉
。
初次運轉時以風量自動模式運轉
；
之後以上次停止時的模式運轉
。
再次觸摸此鍵
，
產品停止運轉
。
停止運轉後但仍接通電源時
，
PM2.5
濃度/定時顯示窗仍將顯示當前的
PM2.5
濃度
。
(觸摸鍵亮起
)
運轉關/開
Notice
提示事項
(button lights
up)
Turn on or off.
Press the button again, the product stops operating.
When operation is stopped with the power connected, The PM2.5 concentration/
timer display window will still show the current PM2.5 concentration.
Press the button to operate.
The product operates in auto air volume mode when it is used for the first time,
then operates in the last mode when it was stopped.
Power off/on
（
觸摸鍵亮起
）
靜音自動
一鍵靜音運轉
。
觸摸此鍵產品靜音運轉
，
並自動控制風量大小
。
(此時風量指示燈熄滅)
再次觸摸此鍵取消此模式
。
(button lights
up)
Press this button again to disable this mode.
Press this button to operate silently and automatically control the air volume.
(The air volume indicator is off at this moment.)
One-button to operate silently.
Silent Auto
Detectable area
Filter replace Filter clean
Auto
Light sensor
Human sensor
OPERATION
使
用
方
法
