Panasonic F-35TMH, Operating Instructions Manual

Page: 8 / 16

How to assemble
Remove the nut from the stand, and insert the stand into the base.
Insert the connection plug of the AC adaptor, fix the power cord into the clip, and then close
the cover to finish the assemble.
Stand
Nut
Reminder: Tighten the nut securely, not to be loosened.
Please follow the step order and install correctly before use
Remove the spinner,cap and guard
stopper nut.
Please keep the plastic bag for future store.
Fix the rear guard to the motor and
then tighten the guard stopper nut securely
Warning
Do not touch the negative
ion emission device when
installing to avoid injury.
Negative ion emission device
Motor shaft
Guard stopper nut
Cap
Spinner
Guard stopper nut
Spinner
Blade
Installing blade
Insert the blade into the motor shaft closely,
then tighten with spinner securely.
(counter clockwise direction)
Installing the front guard
Align the arrowhead of the front guard and
the red mark of the rear
guard, and insert
the hook to the wire rod fully.
Engage the clip to fix the front and rear guard.
Red mark
Arrowhead
mark
Rear guard clip press place
Front guard arrowhead
mark, make sure to
insert into red mark
Make sure the clip
presses backward
Reminder:
This product belongs to double insulation, in order to ensure your safety, please assemble
the guard completely, make sure the clip presses in, then can start the operation.
If the front guard and the rear guard are not assembled as instruction, it may cause electric
charge accumulating phenomena and stop the negative ion from releasing normally.
Please make sure the front guard and the rear guard are assembled correctly.
Installing the base
Installing the blade
B
e
fo
re u
s
e
8
Tighten the nut from the bottom of base to secure the stand to the base.
Align each of 3 holes and 3 projections, then fix the rear
guard to the motor, tighten the guard stopper nut securely
(clockwise direction). (marks the arrowhead of the
rear guard points up)
This product belongs to double insulation,
in order to ensure your safety,
please assemble the clip completely.
Tighten every part securely to avoid the blade from coming out during the operation.
Engage the clip press backward.