Panasonic F-35TMH, Operating Instructions Manual

Page: 5 / 16

Please always follow these instructions
WARNING
Do not cut, modify. Do not forcefully bend,
twist or pull. Do not put near heating
appliances, or put anything heavy on.
Do not bundle.
Prohibit
Prohibit
If damaged power cord or plugis used,
it's easy to cause electric leakage,
electric shock and occur fire.
Make sure to disconnect the plug when
cleaning and
storing away
the product.
Disconnect the
power plug
Improper operating may cause
injury or electric shock.
Do not touch the plug with wet hands.
It may cause electric shock.
Disconnect the plug and wipe it with a dry cloth.
Disconnect the plug unless the produced is been
using.
CAUTION
Do not use the product at
the following locations.
Prohibit Prohibit Prohibit
It may cause health related issue.
Do not touch
It may cause injury.
The product may fall down and
cause injury.
When disconnecting the
plug, please grasp and pull
the plug,
not the cord.
It may cause
short circuit
or damage the power
cord, and occur fire or
electric shock.
CAUTION
If the power cord damaged,please contact the service center or dealer. Exchange by professional in order to avoid danger.
When using the product, do not connect with voltage regulator in order to avoid danger.
Do not operate this product by children.
Reminder : Do not place the product near insecticide, oil corrosive solvent.
(It may cause bad effects on quality, or damage the product.)
B
e
fo
re u
s
e
5
Do not expose yourself to wind
generated by the
productfor a
long time.
Do not use the product near
the obstacles or
unsafe place.
Wipe off dust on the power plug
periodically.
If the plug is used with dust
accumulated on it,humid air etc.
may cause poor insulation and fire.
This appliance is not intended for use by persons
(
including children) with reduced physical, sensory or mental capabilities,
or lack of experiences and knowledge,unless they have been given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
Do not put your fingers into the
guard or any moving part of
the product.
Flame failure, catching fire,
explosion, short circuit, etc, may
occur and cause electric shock of fire.
Where it maybe exposed to
flammable gas or near sources
of flame such as gas ranges.