Panasonic F-35TMH, Operating Instructions Manual

Page: 11 / 16

mode, but timer setting will not be retained in memory .
11
How to use
Open the battery lid: press down and take it out.
Insert the battery.
2pcs of AAA dry cell.
Close battery lid : Align the single side with mark O on the body,press and push to all the way in.
Mode button
Each press of the button will switch to next mode setting.
Normal mode Nature mode Sleep mode
Normal mode: Speed could be adjusted by turning the
adjustment. (Normal mode lamp would turn on)
Nature mode: Speed will be switched to Auto mode.
(Nature mode lamp would turn on)
Sleep mode: Speed will be moderate in every one
hour, until to the minimum speed.
(Sleep mode lamp would turn on)
Negative ion button
Each press of the button will switch to cleaning function Off / On.
ION: release negative ion to clean the air ( ION lamp would turn on.)
Off timer button
Each press of the button will set the turn off time by following step and
the lamp would turn on.
1 2
4
The fan stops operation when the preset hours has passed.
You can set Off and On timer simultaneously.
When setting Off timer 1 hour and On timer 4 hours, the fan stops
operation after 1 hour and resumes after stop operation 3 hours.
ECO button
Each press of the button will switch to ECO Off / On
setting.During ECO mode, the speed and mode
instructionlamp would turn dim.
ECO control:Speed will be adjusted according to
the ambienttemperature detected.
(ECO lamp would be bright)
Swing button
Each press of the button will
switch to next angle setting.
On timer button
4 6
Hour
8
Each press of the button will set the turn
on time by following chart and the lamp
would turn on.
It could preset the mode and speed, the
fan starts operation when the preset
hours has passed.
Under the operation On situation,
choose mode and speed, then
setting on timer, it would enter on
timer mode after 5sec., the fans
would stop the operation and count
down until the setting time
fi nished,
then the fan resumes operation.
Speed adjustment button
Eight level speed instruction lamp shows the level
of speed.
On (Nature) mode, adjust the speed adjustment would
switch to (Normal) mode automatically.
Each press of the button will switch to On / Off.
When plug in and turn on, the fan starts operation
When fan stops and press the on/off button, the fan starts operation at previous setting of
When unplugged, memory will be deleted.
Reminder
If the fan is not turn on, all of the buttons without function.
How to use
Remote control
Control Panel
Turn the adjustment in the clockwise direction could
strengthen the speed, counter clockwise of direction
could moderate the speed.
Memory function:
Lamp turn off
Lamp turn off
Hour
at “Normal” speed. (the fourth level)
Power On/Off button