- 8 -
EN
EN
EN
EN
Checking the status of the
torque clutch and sung point
detection level setting and
Buzzer settings
Press the A button.
The torque clutch and sung point detection
level setting and buzzer setting values will be
displayed (in that order).
Example: If the torque clutch is set to 0 and
sung point detection level setting L1 and the
buzzer is set to sound at the green indicator,
“30” → “L1” → “b1”
Checking the status of the
LED light and rundown error
detecting function and speed
control function settings
Press the B button.
The LED light and tightening time and speed
control setting will be displayed (in that order).
Example: If the LED light mode is set to L1
and the tightening time is set to 0 and speed
control is set to ON,
“d1” → “20” → P0
Checking the tool circuits and
the status of the cross thread
reduction function settings
Press the D button.
The tool circuits and cross thread reduction
function settings will be displayed (in that
order).
Example: “H3” → “R1”
Display
Tool circuit
H1
EYFNA1
H
EYFPA1
NOTE:
When other tools are in the area which
are not set, they may accidentally
receive a signal when setting the tool
by remote control.
Set the tool in another room if possible
or keep a fair distance to avoid this situ-
ation.
Summary of Contents for EYFPA1C
Page 42: ... 42 MEMO ...
Page 43: ... 43 MEMO ...
