- 15 -
EN
Model No: EY3732
II. MAINTENANCE
• To make any adjustments, changing
accessory, or storing the LED
Flashlight, remove battery pack from
the LED Flashlight.
• To clean the LED Flashlight, wipe with
a dry, soft cloth.
III. SPECIFICATIONS
NOTE:
Weight is indicated by 0.01 k
g
.
Model No.
EY3732
Battery voltage
DC 10.8 V
Weight
0.14 k
g
(main unit only)
Model No: EY0L32
Symbol
Meaning
Read the operating
instructions before use.
For indoor use only.
WARNING:
• Do not charge the battery pack
in a high-temperature location,
such as next to a fire or in direct
sunlight.
Otherwise, the battery may
overheat, catch fire, or explode.
• Never use other than the
dedicated charger to charge
the battery pack. Otherwise, the
battery may leak, overheat, or
explode.
WARNING:
The battery pack must be removed
from the LED Flashlight before it is
scrapped.
I. CHARGING THE BATTERY
Charging
CAUTION:
• The charger is designed to operate
on standard domestic electrical
power only as stated in the rating
plate. Charge only on the voltage
indicated on the rating plate of
unit. e.g.230 V / 50 Hz.
• Do not attempt to use it on any
other voltage or frequency rating.
• The ambient temperature range
is between 0 °C (32 °F) and 40 °C
(104 °F). If the battery pack is used
when the battery temperature is
below 0 °C (32 °F), the tool may fail
to function properly.
• If the temperature of the battery
pack falls approximately below
0 °C (32 °F), charging will
automatically stop to prevent
degradation of the battery.
• Use the charger at temperatures
between 0 °C and 40 °C, and
charge the battery at a temperature
similar to that of the battery itself.
(There should be no more than
a 15 °C difference between the
temperatures of the battery and the
charging location.)
EY7530_7430_3732_0L32_02(Eng).indd 15
2014/08/18 15:40:53
