16
15
Calling up readings from memory
Readings can be recalled after being saved without
having to switch the unit on.
1. Press the Memory/Recall button.
• The average readings of all recorded measurements
are displayed.
• The
mark will be displayed (Fig. 10-a).
• When, for example, readings from 21 measurements
have been saved the average of the readings from 21
measurements will be displayed.
2. Press the Memory/Recall button to display readings
starting with from the most recent measurement.
• Each time the Memory/Recall button is pressed
readings are displayed in order of the most recent
measurement (Fig. 10-b).
• No readings will be displayed when there are none in
the memory.
3. Press the On/Off and Start button to switch off the
unit.
If you forget to switch off the unit it will do so
automatically after approx. 30 seconds.
Deleting all data stored in memory
(1) Recall stored data using the Memory/Recall button.
(2) Press the Memory/Recall button again and hold it (for approx. 3
seconds) until all readings are deleted.
NOTE: Readings from individual measurements cannot be deleted.
(3) When data has been deleted the
mark and
will be
displayed on the screen.
Fig. 10-a
Fig. 10-b
CAUTION:
• For persons with poor circulation resulting from diabetes, liver disease,
arteriosclerosis, high blood pressure or other conditions, there may be
significant differences in blood pressure values measured at the wrist
versus at the upper arm.
• Do not confuse self-monitoring with self-diagnosis.
• NEVER change a prescribed medication without first consulting with
your physician.
Storing blood pressure readings
1. The
mark will flash after a measurement has
been completed (Fig. 9-a).
Press the Memory/Recall button.
2. Memory storage is completed.
• Readings of up to 21 measurements can be stored in
memory (Fig. 9-b). Readings over the memory capacity
will be recorded over the oldest measurement in
memory.
• Readings cannot be saved when a measurement has
been unsuccessful (display of the error mark
for
blood pressure readings). Readings can be saved,
however, when the
mark is displayed for the pulse
rate.
Fig. 9-a
Fig. 9-b
(After approx.
one second.)
(After approx.
one second.)
EW3003USA̲Eng 05.1.31 11:18 ページ 15
