Panasonic EW1031, Operating Instructions Manual

Page: 36 / 40

where teeth are not straight:
Brush vertically.
Move the toothbrush to match
the angle of the teeth. (Fig. )
AFTER USE
Toothbrush
1. Wash the toothbrush with
water and shake well to
remove the water. (Fig. 10)
. Return the brush to the brush
stand.
. Use a cloth to clean the main
unit. Wash hard-to-remove
stains with water.
Do not submerge the main
unit in water for a long time.
After washing with water,
wipe dry with a cloth.
Do not scratch or damage
the waterproof rubber seal.
Doing so may allow water to
seep inside and damage the
main unit.
. Place the main unit on the
charger.
If the identification ring comes
off, put it back on. (Fig. 11)
Do not forcibly pull the
identification ring since it can
break easily.
Using the toothbrush without
the identification ring has no
effect on performance; the ring
is simply for user identification
purposes.
•
•
•
•
•
•
•
MAINTENANCE
CAUTION:
Be sure to remove the plug
from the electrical outlet before
cleaning the product. Failure to
do so may result in electrical
shock or other injury.
Charger
Use a cloth to wipe off the
charger.
If cleaning requires a
detergent, use a mild, neutral
cleanser.
Do not use harsh chemicals
such as thinner, benzine or
alcohol as these will discolour
the surface.
About once ever six months
wipe the prongs of the power
plug with a dry cloth.
CAUTION:
Do not wash or submerge the
charger in water.
Clean the power plug
periodically. Dirt and dust
buildup may cause electrical
shock or reduce the
effectiveness of the insulation,
thus resulting in overheating
and a fire.
The supply cord can not be
replaced. If the cord is
damaged, the appliance
should be scrapped.
•
•
•
•
•
•
EW1031_ASIA.indb 36 2009/05/27 19:11:22