10
5.2.
Assembly Instructions
1. Insert the isolation paper to the cathode side of the rechargeable battery, and set the rechargeable battery so that the battery
cushion points upward.
2. Insert the driving block into the housing and apply the grease (Hanarl FL-955) on the water-proof rubber to prevent the pinch-
ing. Then, insert the driving block into the housing.
NOTE:
Make sure not to push the area "A" of the second coil block in order to prevent the deformation of connecting terminals.
3. Put the spring and few drops of alcohol onto the shaft of driving block. Insert the waterproof rubber until the rubber touches
on the conductive rubber.
