17
Operating instructions
Start measurement
When recording the measured value, please
go to step 2 during the flashing process
2.
Press the button to store the
measured value.
3.
Press the button and
take off the cuff.
Press the button for about 5 seconds, to switch
measuring methods of mmHg and kPa. It is mmHg by factory
setting.
(If kPa is selected, it will also be converted into mmHg during
voice broadcast. 1 kPa=7.5 mmHg)
The measured value can be stored up to 90 times. After that,
when new data is stored, the measured value that was stored
first will be replaced.
( EW-BU18 90 times×1 person )
SYS.
DIA.
Pulse
/min
M/R