8 - ENGLISH
Standard installation dimensions (continued)
<When using a lens other than the ET-DLE030 Fixed-focus lens or a
PT-RZ575 / PT-RZ570 projector>
The dimensional relationship between the screen and the projector is shown below.
Establish the dimensions after assessing the area possible for installation.
The zoom function of the lens allows you to adjust the projection distance (excluding the ET-DLE055). Fine adjust
while checking the projected image.
■
Dimensional relationship diagram
z
The illustration shows the ET-PKD120H ceiling mount bracket mounted on a projector.
SH
SH
L (LW/LT)
Screen
H1
L5
SW
SW
SD
100
(3-15/16")
100
(3-15/16"
)
200
(7-7/8")
20
0
(7-7/8")
L1
Projected image
Ceiling
(Units : mm ("))
Note
z
This illustration assumes that the projector will be installed so that the projected image fills the screen and is
properly aligned with it.
z
This drawing is not in exact scale.
SH
Image height
L1
Lens protrusion dimension (from front of set to tip of lens)
SW
Image width
L5
From front center of the attachment plate to front of projector
SD
Projected image size
H1
From lens center to attachment plate (includes the thickness of the
attachment plate)
L
Projection distance
Attention
z
Install the projector with at least 500 mm (19-11/16") gap from the surrounding walls or objects in order to
ensure that the air intake/exhaust ports of the projector will not be blocked.
z
Avoid setting up in places which are subject to sudden temperature changes, such as near an air conditioner
or lighting equipment (studio lamps, etc.).
ET-PKD130B_EN_TQZJ577-7.indd 8
2017/03/13 19:04:52
