8
Removal method
Removing the projector
• WHEN INSTALLED USING CEILING BRACKETS FOR HIGH CEILINGS
Hex head bolts
Hook
A
Remove two hexagonal bolts with washers.
B
Loosen the left and right hexagonal bolts slightly,
and remove the set from the hooks on the angle
adjustment bracket.
• WHEN INSTALLED USING CEILING BRACKETS FOR LOW CEILINGS
Hex head bolts
Hook
Attention
z
Be sure that the hexagonal bolts with washers are
not loosened more than necessary.
z
Removing the projector must be carried out by two or
more persons.
Angle adjustment bracket
C
Remove six hexagonal bolts with washers on the
angle adjustment bracket from the projector mount
bracket, and remove the angle adjustment bracket.
Attention
z
The hexagonal bolts with washers and the angle
adjustment bracket that have been removed are
re-used.
Attention
z
After use, dispose of the set and projector mount bracket in an appropriate manner.
