13
External dimensions
Width: 384 mm (15-1/8")
Height: 56 mm (2-7/32")
Length: 447 mm (17-19/32")
Weight
Approx. 2.9 k
g
(6.4 lbs.)
Specifications
Attaching the drop prevention set to the ceiling
Anchoring nuts or
curled plugs
*1
(M8 or 5/16")
Flat washer
*2
Wire rope
*2
Spring washer
*1
Hex head bolt
*1
(M8 or 5/16")
Within 500 mm
(19-11/16")
(recommended)
Within 500 mm
(19-11/16")
(recommended)
*1: Commercially available product
*2: Supplied with this product
<Work procedures>
A
Mount the anchoring nuts or curled plugs (M8 or 5/16")
in the stable ceiling surface (position shown in left fig
-
ure).
Attention
z
When mounting the anchoring nuts or curled plugs (M8
or 5/16") to the ceiling, be careful that there is no slack in
the wire ropes between the projector and the ceiling.
B
Tighten the commercially available hex head bolts
(M8 or 5/16") to the anchor, passing through the com-
mercially available spring washers (M8), the supplied
flat washers (M8), and the rings of the ends of the wire
ropes.
Attention
z
Always use the wire ropes and flat washers that are
supplied with this product.
z
Anchoring nuts or curled plugs, hex head bolts, and
spring washers are available for purchase separately.
Note
z
For attaching the wire ropes to the projector, refer to
page 9.
Ú
The figure illustrates an example in which a ceiling bracket for high ceilings is installed.
