10
Installation method (Continued)
Suspending the projector
• WHEN INSTALLED USING CEILING BRACKETS FOR HIGH CEILINGS
Hook
FRONT display
A
Install the projector to the pole base by fitting the
adjustable hook part of the angle adjusting bracket
over the hex head bolts.
Attention
z
Check that the thread ridges of the temporarily
fastened captive washer hex head bolts are tightly
engaged with the nuts.
z
Do not release hand until the hexagonal bolts are
fixed to the hook sections of the angle adjustment
bracket.
z
Mounting and installation must be carried out by two
or more persons.
Secure using
hexagonal bolts
Pole securing
bracket
B
Secure the pole securing bracket and the angle ad-
justment bracket using the two removed hexagonal
bolts with washers (M6 × 16) as shown on the left.
Attention
z
Tighten the hex head bolts securely in a total of four
areas after adjusting the installation angles as shown
on page 11.
• WHEN INSTALLED USING CEILING BRACKETS FOR LOW CEILINGS
Hook
A
Install the projector to the pole base by fitting the
adjustable hook part of the angle adjusting bracket
over the hex head bolts.
Attention
z
Check that the thread ridges of the temporarily
fastened captive washer hex head bolts are tightly
engaged with the nuts.
z
Do not release hand until the hexagonal bolts are
fixed to the hook sections of the angle adjustment
bracket.
z
Mounting and installation must be carried out by two
or more persons.
Secure using hexagonal bolts of
the angle adjustment bracket
Attachment
plate
B
Secure the attachment plate and the angle adjust-
ment bracket using the two removed hexagonal
bolts with washers (M6 × 16) as shown on the left.
Attention
z
Tighten the hex head bolts securely in a total of four
areas after adjusting the installation angles as shown
on page 12.
