Menu navigation
ENGLISH - 19
[CONTROL DEVICE SETUP]
Enable/disable the button operations on the control panel and the remote control of the projector.
1) Select [SECURITY] from the main menu.
2) Press the <ENTER> button.
f
The
[SECURITY]
screen is displayed.
Enter the security password set on the projector, and press the <ENTER> button.
3) Press
as
to select [CONTROL DEVICE SETUP].
4) Press the <ENTER> button.
f
The
[CONTROL DEVICE SETUP]
screen is displayed.
5) Press
as
to select [CONTROL PANEL] or [REMOTE CONTROL].
[CONTROL PANEL]
Sets the limitation on the control from the control panel of the projector.
[REMOTE CONTROL]
Sets the limitation on the control from the remote control of the projector.
6) Press the <ENTER> button.
f
The
[CONTROL PANEL]
screen or the
[REMOTE CONTROL]
screen is displayed.
7) Press
as
to select [CONTROL PANEL] or [REMOTE CONTROL].
8) Press
qw
to switch to [USER].
f
The limitation of the control from the control panel or the remote control of the projector can be set.
[ENABLE]
Enables all button operations.
[DISABLE]
Disables all button operations.
[USER]
Operation of all buttons can be enabled/disabled separately.
9) Press
as
to select [INPUT SELECT BUTTON], and press the <ENTER> button.
f
The
[INPUT SELECT BUTTON]
screen is displayed.
10) Press
as
to select [SLOT1 BUTTON], [SLOT2 BUTTON], or [SLOT BUTTON].
11) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[TOGGLE]
Switches the input of the Interface Board installed in the corresponding slot in turn when the button is
operated.
[SDI OPT1 [SLOT1]]
*1
Fixes to selection operation of the SDI OPT1 input of the Interface Board.
[SDI OPT2 [SLOT1]]
*1
Fixes to selection operation of the SDI OPT2 input of the Interface Board.
[SDI OPT1 [SLOT2]]
*2
Fixes to selection operation of the SDI OPT1 input of the Interface Board.
[SDI OPT2 [SLOT2]]
*2
Fixes to selection operation of the SDI OPT2 input of the Interface Board.
[SDI OPT1 [SLOT]]
*3
Fixes to selection operation of the SDI OPT1 input of the Interface Board.
[SDI OPT2 [SLOT]]
*3
Fixes to selection operation of the SDI OPT2 input of the Interface Board.
[DISABLE]
Disables button operations.
*1 This is displayed when [SLOT1 BUTTON] is set and this Interface Board is installed in <SLOT 1>.
*2 This is displayed when [SLOT2 BUTTON] is set and this Interface Board is installed in <SLOT 2>.
*3 This is displayed when [SLOT BUTTON] is set and this Interface Board is installed in <SLOT>.
12) Press the <MENU> button.
f
Returns to the
[CONTROL PANEL]
screen or the
[REMOTE CONTROL]
screen.
13) Press
as
to select [APPLY], and press the <ENTER> button.
f
The confirmation screen is displayed.
14) Press
qw
to select [OK], and press the <ENTER> button.
Note
f
When a button operation is performed on the device set to [DISABLE], the
[CONTROL DEVICE PASSWORD]
screen is displayed.
Enter the control device password.
f
The
[CONTROL DEVICE PASSWORD]
screen will disappear when there is no operation for approximately 10 seconds.
