Panasonic ET-MDNFB10, Operating Instructions Manual

Page: 12 / 26

Menu navigation
12 - ENGLISH
Menu navigation
This section explains about the on-screen menu (menu screen) that can be operated by installing this Interface
Board in the slot of the projector.
For the menu items with
l
in the following table, the additional explanation for the target model is described.
Refer to the explanation together with the “Operating Instructions” of the projector.
Main menu item Detailed menu item PT-RQ22K
[DISPLAY OPTION]
[BACKUP INPUT SETTING]
l
[SLOT IN]
l
[PROJECTOR SETUP]
[STARTUP INPUT SELECT]
l
[SCHEDULE]
l
[REMOTE2 MODE]
l
[MULTI DISPLAY] ―
l
[SECURITY] [CONTROL DEVICE SETUP]
l
Note
f
This document explains mainly for the operation regarding the input to this Interface Board.
[BACKUP INPUT SETTING]
Set the backup function that switches the signal to the backup input signal as seamless as possible when input
signal is disrupted.
1) Select [DISPLAY OPTION] from the main menu.
2) Press the <ENTER> button.
f
The [DISPLAY OPTION] screen is displayed.
3) Press
as
to select [BACKUP INPUT SETTING].
4) Press the <ENTER> button.
f
The [BACKUP INPUT SETTING] screen is displayed.
5) Press
as
to select [BACKUP INPUT MODE].
6) Press the <ENTER> button.
f
The [BACKUP INPUT MODE] screen is displayed.
7) Press
as
to select the combination of the input and press the <ENTER> button.
Primary input Secondary input
Number of signals
constructing one
screen
Details
[OFF] ― Disables the backup function.
[SDI OPT1 [SLOT1]]
*1
[SDI OPT1 [SLOT2]]
*1
1 Enables the backup function.
*1 This is displayed when these Interface Boards are installed in <SLOT 1> and <SLOT 2>.
8) Press the <MENU> button.
f
The [BACKUP INPUT SETTING] screen is displayed.
9) Press
as
to select [AUTOMATIC SWITCHING].
f
When [BACKUP INPUT MODE] is set to [OFF], [AUTOMATIC SWITCHING] cannot be selected.
10) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[ENABLE]
Switches to the secondary input (primary input) automatically when the input signal for primary input
(secondary input) is disrupted.
[DISABLE] Disables the automatic input switching function.