14
6. Attach the left and right guard frames.
[1] Attach the left and right guard frames to the left and right frames using the built-in bolt with hex socket
(M6x50), flat washer (M6) and spring washer (M6).
• This product is equipped with gas springs to
enable the upper frame and projector to be
easily raised.The gas springs normally operate
slowly because of the projector’s weight. When
the upper projector is removed, however, for
example during inspection, the resulting lighter
weight will cause the upper frame to fly upward.
Therefore, when removing the fixing bolts from
the upper frame and left and right frames, keep
your face and body away from the upper frame.
Flat washer
Spring washer
Allen hex socket bolt
Upper frame, left and right frame fixing bolt
(Allen hex socket bolt M10x60)
Upper frame stopping hole
Spring washer(M10)
Flat washer(M10)
Spring washer(M10)
Assembly process
(continued)
•
When removing the fixing bolts that
attach the upper frame to the left and
right frames, do not place your face
near the upper edge of the upper
frame. Injury may result.
CAUTION
• When the upper frame is raised, it may lower
because of the projector
s weight. Use the
fixing bolts removed from fixing the upper frame
to the left and right frames to stabilise the upper
frame by inserting the bolts through the upper
frame stopping hole on the left and right frames.
Note:
