12
Upper frame
Upper projector
[3] Place the upper frame over the adjustment bolts as
shown on the left.
[4] Fix the upper frame in place using the washer (B), washer (C), fixing nut (M10), hex nut (M10) and snap pin .
Snap pin
Snap pin
After inserting the snap pin in the bolt hole, turn it
to the side as shown below.
Hex nut (M10)
Fixing nut (M10)
Rounded side
Indented side of washer
Note : Use washer (C) for . Washer (C) is thinner than
washer (B).
Washer(B)
5. Attach the upper frame and upper projector to the left and right frames and gas springs.
Upper projector
Washer
Connection hole
Insert the washer into the connection hole
on the other side in the same manner.
Upper frame
Assembly process
(continued)
[1] Turn the upper frame and upper projector over so
that the projector is right side up. Insert the washers
in the upper frame connection holes as shown at left.
