ENGLISH-5
The illustration for this procedure uses PT-DZ21K2
as an example.
1) Remove the projection lens cover.*
1
2) Align the mark on the projection
lens (orange color) with the mark
on the projector (O on the left
side of the LOCK) and insert; then
rotate in a clockwise direction
until it makes a "click" sound.
3) Secure the projection lens with
the lens drop prevention screw
included with the projector.
z
Secure it in the screw hole (location shown in
the figure to the left) on the right side of the
projection lens mark (orange color) using a
Phillips screwdriver.
4) Attach the projection lens cover.*
1
Attention
z
Gently turn the projection lens counterclockwise
to check that it will not fall out.
Attaching the Lens
Attaching the Lens / Detaching the Lens (continued)
Projection
lens cover
(i)
(i)
(i)
(i)
(ii)
Orange color
(i)
(ii)
Lens drop
prevention
screw
*1: Only when using a projector that has a projection lens cover. In addition, there are cases where the attachment method
or removal method of the projection lens cover differs from the procedure (illustration) described above depending on the
model being used. For details, see "Attaching/removing the projection lens (optional)” in the operating instructions for
the projector you are using.
Summary of Contents for ET-D75LE95
Page 15: ...ENGLISH 15 MEMO ...
Page 30: ...14 Appendix Annexe MEMO ...
Page 31: ...15 Appendix Annexe MEMO ...