Panasonic ET-D75LE95, Operating Instructions Manual

Page: 6 / 32

6-ENGLISH
The illustration for this procedure uses PT-DZ21K2
as an example.
1) Remove the projection lens cover.* 1
2) Remove the lens drop prevention
screw.
z
Remove the first screw on the right side of the
projection lens mark (orange color) using a
Phillips screwdriver.
3) Turn the projection lens
counterclockwise while holding
down the lens release button to
take it off.
z
Turn counterclockwise until the projection lens
mark (orange color) is aligned with the mark
on the projector (O on left side of the LOCK).
4) Attach the projection lens cover.* 1
Attention
z
Store the projection lens that was removed while
avoiding vibration and impact.
z
Store the lens drop prevention screw that was
removed and do not lose it.
z
Attach the supplied lens cover before storing the
lens.
Projection
lens cover
(i)
(i)
(i)
(i)
(ii)
Lens
release
button
Orange color
(iii)
(i)
(ii)
Detaching the Lens
*1: Only when using a projector that has a projection lens cover. In addition, there are cases where the attachment method
or removal method of the projection lens cover differs from the procedure (illustration) described above depending on the
model being used. For details, see "Attaching/removing the projection lens (optional)” in the operating instructions for
the projector you are using.
Attaching the Lens / Detaching the Lens (continued)